Developing flow correlations for different valve geometries using reference media for R-744.(Report): An article from: HVAC & R Research
Book Details
Author(s)Norbert Stulgies, Jurgen Kohler, Wilhelm Tegethoff, Sven Forsterling, Axel Muller, Horst Kappler
ISBN / ASINB002F1RAQE
ISBN-13978B002F1RAQ9
AvailabilityAvailable for download now
Sales Rank99,999,999
MarketplaceUnited States 🇺🇸
Description
This digital document is an article from HVAC & R Research, published by American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Inc. on May 1, 2008. The length of the article is 5980 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available immediately after purchase. You can view it with any web browser.
From the author: This paper presents experimental data of three different prototype valves with cone-, ball-, and slide-valve geometries that have been tested using R-744 and two reference media, ARAL 4005 and R-729, under one-phase flow conditions. Three different test rigs were used to carry out the tests using boundary conditions with the objective to achieve more or less similarity regarding the Reynolds number and the Mach number. One aim was to find physical-based flow correlations to describe the flow behavior of the three investigated valve geometries with carbon dioxide (R-744), hydrocarbon-based low-viscosity fluid (ARAL 4005), and air (R-729) as the fluid. The main goal of this research was to find a correlation between the flow coefficients of both (a) R-744 and ARAL 4005 and (b) R-744 and R-729 to enable the transfer of a flow coefficient measured for ARAL 4005 or R-729 into a flow coefficient for R-744.
Citation Details
Title: Developing flow correlations for different valve geometries using reference media for R-744.(Report)
Author: Norbert Stulgies
Publication:HVAC & R Research (Magazine/Journal)
Date: May 1, 2008
Publisher: American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Inc.
Volume: 14 Issue: 3 Page: 417(17)
Article Type: Report
Distributed by Gale, a part of Cengage Learning
From the author: This paper presents experimental data of three different prototype valves with cone-, ball-, and slide-valve geometries that have been tested using R-744 and two reference media, ARAL 4005 and R-729, under one-phase flow conditions. Three different test rigs were used to carry out the tests using boundary conditions with the objective to achieve more or less similarity regarding the Reynolds number and the Mach number. One aim was to find physical-based flow correlations to describe the flow behavior of the three investigated valve geometries with carbon dioxide (R-744), hydrocarbon-based low-viscosity fluid (ARAL 4005), and air (R-729) as the fluid. The main goal of this research was to find a correlation between the flow coefficients of both (a) R-744 and ARAL 4005 and (b) R-744 and R-729 to enable the transfer of a flow coefficient measured for ARAL 4005 or R-729 into a flow coefficient for R-744.
Citation Details
Title: Developing flow correlations for different valve geometries using reference media for R-744.(Report)
Author: Norbert Stulgies
Publication:HVAC & R Research (Magazine/Journal)
Date: May 1, 2008
Publisher: American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Inc.
Volume: 14 Issue: 3 Page: 417(17)
Article Type: Report
Distributed by Gale, a part of Cengage Learning
