The Anchor - THE ORIGINAL Under-Desk Headphone Stand Mount
Book Details
Publisher
Elevation Lab
ISBN / ASIN
B00P31BMHG
ISBN-13
978B00P31BMH2
Availability
In Stock.
Sales Rank
#99,999,999
Marketplace
United States 🇺🇸
Ratings & Reviews
No reviews yet — be the first!
No reviews yet.
Description
The original under desk headphone mount
Get rid of cord clutter on your desk and have easy access to your headphones with the Anchor.
Mounts in seconds and holds ultra-strong with the same adhesive GoPro uses.
Flexible silicone construction protects your headphones and won't hurt if you ever bump it with you knee.
Tip
If you ever need to remove the Anchor and it is holding too strong - just heat it up with a hair dryer and the adhesion will soften.
Mounting Instructions
The 3M VHB (Very High Bond) adhesive will hold with over 40 pounds of adhesion to clean and finished surfaces.
Important: It will not hold to unfinished wood, bare mdf, or if the surface feels fibrous. If the bottom of your desk isn't finished, we recommend either putting some finish on (polyurethane works well) or screwing it in.
Make sure the surface is clean, dry, and oil free.
Firmly press the Anchor to your desk for the best adhesion.
It takes 24 hours for the adhesive to fully cure to max strength.
ElevationLab Guarantee
The Anchor, like all our products, is guaranteed for life to be defect-free. If you have any issues, please contact us so we can make it right.
Get rid of cord clutter on your desk and have easy access to your headphones with the Anchor.
Mounts in seconds and holds ultra-strong with the same adhesive GoPro uses.
Flexible silicone construction protects your headphones and won't hurt if you ever bump it with you knee.
Tip
If you ever need to remove the Anchor and it is holding too strong - just heat it up with a hair dryer and the adhesion will soften.
Mounting Instructions
The 3M VHB (Very High Bond) adhesive will hold with over 40 pounds of adhesion to clean and finished surfaces.
Important: It will not hold to unfinished wood, bare mdf, or if the surface feels fibrous. If the bottom of your desk isn't finished, we recommend either putting some finish on (polyurethane works well) or screwing it in.
Make sure the surface is clean, dry, and oil free.
Firmly press the Anchor to your desk for the best adhesion.
It takes 24 hours for the adhesive to fully cure to max strength.
ElevationLab Guarantee
The Anchor, like all our products, is guaranteed for life to be defect-free. If you have any issues, please contact us so we can make it right.
Similar Products
