Ryobi A99DLK4 Wood and Metal Door Lock Installation Kit for Installing Deadbolts and Locksets

As a Do-It-Yourselfer or homeowner, you should be ready to tackle any job that comes your way. Be prepared for easy deadlock and lockset installation with this Ryobi Wood and Metal Door Lock Installation Kit! The template fits snugly on standard sized wood or light metal doors. Align the auto strike locator with striker plate without measurements being needed. Keep it in place by driving the screws into the latch bore area. This will keep the template steady for when it's time to bore out holes. Be sure your measurements of the main hole from the edge of the door are accurate by using a built in adjuster. Set it to your preferred length and you are ready to roll. Attach the arbor and pilot bit to the 2-1/8-inch hole saw. Attach this to your favorite drill and create a clean cut hole for your locksets. Drilling out the latch bore is just as easy! Simply attach the 1-inch hole saw to your drill or use the wood spade bit and use the template again. Continue by assembling your hardware. It's as simple as that! No more worrying about incorrect angles. This Ryobi product is the go-to for painless, stable, and accurate door lock installation.