Total Invisible 940nM IR lamp Board with Light Sensor (48 Black LED Illuminator Array) 30ft Range, 120 deg, 12VDC

This discrete IR lamp will illuminate the whole room with total invisible 940nM wave length spectrum.

Increase the brightness and range for your security camera with night vision capability.

Requires 12VDC, 300mA or more, power supply (not included).

Indoor use only.


Works best with SCS 3.7mm, 940nM IR Filtered Pinhole Lens

Super compact yet strong 940nM IR lamp at low power consumption (min: 12VDC/300mA). As long as your camera is equipped with 940nM filter lens, this IR lamp will let the camera see in total dark like a daytime with zero glow from the IR (850nM filter will work but the IR effect will be lessened by about 50%).
The lamp will provide 120deg wide angle beam to cover the whole room. Comes with a light sensor that will turn the light ON and OFF automatically. Quality LED will last years and years.

---- Is your camera 940nM IR lamp compatible? ----
If your camera comes with a night vision feature with built-in IR LEDs and remains total dark at night, most likely your camera is equipped with a 940nM IR filter. However, if LEDs glow red at night, (you must look at it closely head on) it is 850nM system and will not work 100% with our 940nM IR lamp.