Mini USB & Micro USB Dash Cam Hardwire Kit, Car Dash Camera Charger Power Cord with 4 Fuse Tap Cable & Installation Tool, Compatible with Dash Cam, GPS, Radar Detector, All Mini&Micro USB Port Device

Technical Details:
Connector: Mini USB Connector+Micro USB converter
Input Voltage: DC12V-24V
Output Voltage/Current: 5V/2A Max Support to 2A
Low Voltage Protection: Car 11.6V, Truck 23.2V
Working Temperature:-40-85℃
Cable Length: 15ft
Main Features:
The Hardwire kit for dash cameras that use Mini USB or Micro USB
Low Voltage & Car Battery Protection,automatic cut off when voltage below 11.6V or 23.2V.
FM/AM Anti-Interfere Protection
Free up the Cigarette lighter(12v Power Socket) For other devices
Achieve Dash Cam's Parking mode, power camera when ignition is turned off
Package Included:
1*Mini USB Hard Wire Kit
1*Micro USB Converter
1*Standard ATO Fuse Tap Adapter+5Amp Fuse
1*Mini(ACN) Fuse Tap Adapter+5Amp Fuse
1*Low Profile Mini(ACS) Fuse Tap Adapter+5Amp Fuse
1*Micro2 Fuse Tap Adapter+5Amp Fuse
1*Wire Stripper
5*Cable Clips
Easy installation
1 Find ACC in the car(ACC position differs from different car brands
2 Open ACC cover plate, measure the place for wiring, long-time parking monitor need to connect with BATT.
3 When vehicle hard wire kit goes to A point, open frame cover, make it as concealed wiring; open closed soft glue, put cable into it.
4 Open fuse box cover, let cable inside
5 Red wire of low voltage protector connect to positive pole(BATT+), black wire connect to the negative pole(Ground).