The primary purpose of this tutorial is to introduce new users to the ANSYS Workbench software, by illustrating how it can be used to solve a variety of problems. To help new users begin to understand how good finite element models are built, this tutorial takes the approach that FEA results should always be compared with other data results. In several chapters, the finite element tutorial problem is compared with manual calculations so that the reader can compare and contrast the finite element results with the manual solution. Most of the examples and some of the exercises make reference to existing analytical solutions
In addition to the step-by-step tutorials, introductory material is provided that covers the capabilities and limitations of the different element and solution types. The majority of topics and examples presented are oriented to stress analysis, with the exception of natural frequency analysis in chapter 11, and heat transfer in chapter 12.
Table of Contents
1. Introduction
2. Stiffness Matrices
3. Introduction to Workbench
4. Using DesignModler to Create Geometry
5. Using DesignModler to Create Surface and Line Geometry
6. Introduction to Finite Element Simulation
7. Modeling Techniques
8. 3D Solid Elements & Simulation Techniques
9. Plane Stress/Strain Modeling & Simulation Techniques
10. Plate and Shell Element Modeling
11. Natural Frequency and Mode Shapes Analysis
12. Steady-State Heat Transfer
13. Finite Element Analysis for Engineers
Appendix A: Matrices and Simultaneous Equations
Appendix B: Matrix Operations Using Excel
Index