Asphalt modified by SBS triblock copolymer: structures and properties.: An article from: Polymer Engineering and Science

This digital document is an article from Polymer Engineering and Science, published by Society of Plastics Engineers, Inc. on June 1, 1996. The length of the article is 6397 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.

From the author: Microstructural transformation of a poly(styrene-b-butadiene-b-styrene), SBS, triblock copolymer blended with asphalt was studied as the asphalt composition was varied from 0 wt% to 96 wt%. Transmission electron microscopy (TEM), dynamic mechanical spectrometry (DMS), and differential scanning calorimetry (DSC) were used. The blends were made in batch mixers at 200 [degrees] C, or by solution casting from a nonselective solvent (trichloroethane) at [approximately]28 [degrees] C. Asphalt partially solubilizes the polybutadene (PB) midblock of the SBS producing saturated PB microdomains along with macrodomains of asphalt. When the asphalt concentration was varied from 10 to 90 wt%, the asphalt phase separated into a variable number of large domains, while the SBS-rich regions formed a continuous matrix. Networks of SBS-rich regions were observed at low magnification; these are referred to as macro-networks. At higher magnification, networks that are stabilized by polystyrene (PS) microdomains (denoted micro-networks) are also formed. The presence of a macro-network is also confirmed by stress relaxation tests. The macro-network broke down into microgel-like structures when the asphalt composition exceeded 90 wt%. Examination of the interior of the SBS-rich regions showed that the shape of the PS microdomains transformed from short cylinders to lamellae, hexagonally perforated lamellae (HPL), back to lamellae, short cylinders, and finally to spheres. DMS and DSC indicate a systematic increase in the PB glass transition temperature ([T.sub.g]) and negligible change in the [T.sub.g] of PS as the asphalt content increases. Triblock copolymers that can form a macro-network at low concentration will be more desirable for highway pavement modification.

Citation Details
Title: Asphalt modified by SBS triblock copolymer: structures and properties.
Author: A. Adedeji
Publication:Polymer Engineering and Science (Refereed)
Date: June 1, 1996
Publisher: Society of Plastics Engineers, Inc.
Volume: v36 Issue: n12 Page: p1707(17)

Distributed by Thomson Gale