Search Books

Dioxins and furans formation in pilot incineration tests of sewage sludge spiked with organic chlorine [An article from: Chemosphere]

Author G. Mininni, A. Sbrilli, E. Guerriero, M. Rotatori
Publisher Elsevier
📄 Viewing lite version Full site ›
🌎 Shop on Amazon — choose country
8.95 USD
🛒 Buy New on Amazon 🇺🇸

✓ Available for download now

Share:
Book Details
PublisherElsevier
ISBN / ASINB000RQYPEY
ISBN-13978B000RQYPE2
AvailabilityAvailable for download now
MarketplaceUnited States 🇺🇸

Description

This digital document is a journal article from Chemosphere, published by Elsevier in 2004. The article is delivered in HTML format and is available in your Amazon.com Media Library immediately after purchase. You can view it with any web browser.

Description:
The factors affecting polychlorinated dibenzo-p-dioxins (PCDD) and polychlorinated dibenzofurans (PCDF) formation were studied in sewage sludge incineration tests carried out on a demonstrative plant. The plant includes a circulating fluidised bed furnace (FBF) and a rotary kiln furnace (RKF), operating alternatively. During the tests sewage sludge was spiked with chlorinated hydrocarbons and the operating parameters of the afterburning chamber were varied. PCDD/F were sampled in each test before the bag filter, thus collecting the above contaminants before abatement systems. From the tests it appeared that PCDD/F were always produced in more abundance in the tests carried out by FBF than by RKF. The higher PCDD/F concentrations in the tests by FBF were reached when sewage sludge was spiked with a high dosage of a surrogate organic mixture of chlorinated hydrocarbons and when the afterburning chamber was used only as transit equipment with the burner off. The distribution of the different PCDD/F homologues was compared. P"5CDFs were generally the prevalent fraction, with very few exceptions for the tests by RKF at high temperature of the afterburning chamber. As for FBF tests, it was found that the PCDD/F homologue profile depends on the afterburning chamber temperature.