12V Wireless Controller with Dual Outputs (12V) to your electronic, LED, Relay or anything operating at 12V up to 5 Amps per channel. This is 60W max per channel; Please do not over power these as the board will heat up and blow
Coding: All remotes and controllers for this model are coded the same, so they will activate each other, HOWEVER you must open the receiver and press a button to program in such manner: 1. Open receiver with screw driver, 2 power receiver with 12V DC, Hold the learning button inside, very small button, until light flashes. Press a button the the remote you are programming. A light will shine if program is successful. Test and hear for clicks with the remote pressing on/off. If you wish to delete that remote, hold the learning button until the light shuts off. This means all codes have been removed from the receiver