Dwyer Portable Static Pr Tip, A-303, For 3/16" Plastic/Rubber Tubing, 4" (101 mm) Insertion Depth

These sensors are for use with Manometers, Magnehelic® Gages, Pressure Switches and other Controllers to pick up or sense static pressure drop across air filters and cooling coils, blower input and discharge pressures, etc. The angled tips shown have 4" insertion depth. Each has four radially drilled .040" sensing holes. All except Model A-303 mount in 3/8" hole in duct. For portable use, a magnet holds No. A-303 in place. No. A-305 is used where a very low actuation or sensing point is required on a pressure switch or gage or where response time is critical. No. A-307 and A-308 are suitable for use in low velocity systems or where the need for accuracy is less critical.

• Hti-Xintai Digital Manometer, Dual Port Air Pressure Meter Pressure Gauge HVAC Gas Tester, Large LCD Display with Backlight, Basic
• PerfectPrime PT1302, 304 Stainless Steel Static Tube, 130 x 60 mm (5.13" x 2.34") Length
• Dwyer 6846277 Portability Kit for Magnehelic Gauges
• RUPSE Hand-held HT-1890 Digital Differential Pressure Gauge Barometer Professional Digital Air Pressure Meter & HVAC Manometer
• TPI A774 Silicone Pressure Tubing, 6' Length, For Combustion Analyzers and Digital Manometers
• PerfectPrime AR1890 Professional Digital Air Pressure Meter & Manometer to Measure Gauge & Differential Pressure ±13.79kPa / ±2 psi / ±55.4 H2O
• UEi Test Instruments EM201B Test Dual Input Differential Manometer
• UEi Test Instruments PDT650 Folding Pocket Digital Thermometer
• Testo 0560 1510 510I Differential Pressure Manometer Smart and Wireless Probe, 1" Height, 1" Width, 6" Length
• Dwyer Gauge Fluid, Red, 4 Oz Bottle, 0.826 sp. gr.