SainSmart CNC Router Single 1 Axis 3.5A TB6560 Stepper Stepping Motor Driver Board

Product Parameters

* Very easy to use, no instructions, all of use are marked on the board
* Definitely use the new chips imported from Japan, Toshiba TB6560
* With large heat sink to ensure good heat dissipation
* Input signal high-speed opt coupler isolation, guarantee not losing steps
* Semi-flow mode adjustable, semi-flow current adjustable, not the general design on the market, with a variety of semi-flow model and semi-flow current setting function
* Attenuation model adjusted for all the motors can be locked when no noise
* Ultra-small, the overall size: 62mm * 75mm, installation of four mechanical positioning hole size: 65mm * 55, hole size Φ3mm
* The form of stud-type connectors and an optional plug-in

* Rated voltage: DC 12V-24V
* Maximum current: 3.5A
* Current adjustable (Current Settings): 0.5A, 1A, 1.5A, 1.8A, 2A.2.5A, 3.5A
* Subdivision adjustable (Excitation Mode): 1,2,8,16

Attenuation adjustable (Decay Mode)

0 %---- no decay mode
--- 25% of the slow decay mode
--- 50% of the normal mode
100% - Fast Decay mode
----- Decay mode of regulation by different motors to match impedance, thereby eliminating the noise when locked stepper motor and motor movement in the shake.

Automatic half current setting (Torque Settings)

%---- No pulse when the current 20 to normal operating current of 20%
50 %---- no pulse current 50% to normal operating current
75 %---- no pulse current 75% to normal operating current
100% --- no pulse when the current 100% to normal operating current

Package List

1 x Single Axis 3.5A TB6560 Stepper Motor Driver
3 x Terminals

• SainSmart 1 Axis CNC Servo Stepper Motor Motion Programmable Controller
• STEPPERONLINE Nema 23 CNC Stepper Motor 2.8A 178.5oz.in/1.26Nm CNC Stepping Motor DIY CNC Mill
• STEPPERONLINE NEMA 23 Stepper Motor (Geared Stepper Motor) Alloy Steel Mounting Bracket ST-M2
• NEWSTYLE 24V 15A Dc Universal Regulated Switching Power Supply 360W for CCTV, Radio, Computer Project
• Stepper Motor Controller PWM Pulse Signal Generator Speed Regulator Board,DC 15-160V/5-12V
• STEPPERONLINE Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-lead W/ 1m Cable and Connector compatible with 3D Printer/CNC
• 4pcs Nema 23 Stepper Motor Steel Mounting Bracket with Mounting Screws
• SainSmart 5 Axis Breakout Board for Stepper Motor Driver CNC Mill
• WINOMO Nema 17 Stepper Motor Mounting Bracket w/ M3 Screws 2 Pack
• ELEGOO UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable for Arduino RoHS Compliant