Battery Packs Lithium Ion Polymer Battery 3.7V 1200mAh (1 piece)

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 1200mAh for a total of about 4.5 Wh.The batteries come pre-attached with a genuine 2-pin JST-PH connector as shown and include the necessary protection circuitry. Because they have a genuine JST connector, not a knock-off, the cable wont snag or get stuck in a matching JST jack, they click in and out smoothly. The included protection circuitry keeps the battery voltage from going too high (over-charging) or low (over-use) which means that the battery will cut-out when completely dead at 3.0V. It will also protect against output shorts. However, even with this protection it is very important that you only use a LiIon/LiPoly constant-voltage/constant-current charger to recharge them and at a rate of 500mA or less. Like most lipos, the batteries we sell do not have thermistors built in. This is why we suggest charging at 1/2C or even less - 500mA max in this case which is how much you can get from a USB port.

• Adafruit Micro Lipo w/MicroUSB Jack - USB LiIon/LiPoly charger - v1 [ADA1904]
• Bluetooth / 802.15.1 Development Tools Adafruit Feather 32u4 Bluefruit LE
• Adafruit 2821 Feather HUZZAH with ESP8266 Wi-Fi
• Adafruit Micro Lipo - USB LiIon/LiPoly Charger [ADA1304]
• Adafruit 259 , USB Li-Ion/LiPoly Charger, v1.2
• Adafruit Slim Sticker-type GSM/Cellular Quad-Band Antenna - 3dBi uFL [ADA1991]
• Diymore 5V USB Power PCM2704 Mini USB Sound Card DAC Decoder Board for PC Computer
• PowerBoost Charger, Rechargeable 5V Lipo USB Boost at 500mA+
• Adafruit Breadboard-Friendly SPDT Slide Switch [ADA805]
• ADAFRUIT INDUSTRIES 1578 Lithium Ion Polymer Battery - 3.7v 500mAh