CanaKit 5V 2.5A Raspberry Pi 3 B+ Power Supply/Adapter (UL Listed)

2.5A is now a requirement for the Raspberry Pi 3. The CanaKit 2.5A Raspberry Pi power supply / adapter has been specially designed and tested for the new Raspberry Pi 3 and incorporates an inline noise filter for highest stability and reliable operation.

This power supply differs from typical standard 5V USB power supplies in the market in that it can deliver a full 2.5A and still output a voltage well within the USB minimum voltage specifications. Standard 5V USB power supplies in the market have a high voltage drop when the full current is drawn from them which may cause the Raspberry Pi to reboot unexpectedly.

With this power supply, you can power the Raspberry Pi 3 at full load as well as up to 1.2A across the four USB ports. The power supply still has about 0.5A of output power to spare, so even at the maximum current supported by the Raspberry Pi 3, the power supply is not at its absolute maximum.

It is also ideal for use by anyone over-clocking the Raspberry Pi which causes higher power requirements that a lower power adapter may not be able to supply.

• Element14 Raspberry Pi 3 B+ Motherboard
• Flirc Raspberry Pi Case Gen2 (New Model)
• RS Components Raspberry Pi 3 B+ Motherboard
• iUniker Raspberry Pi 3 B+ Case, Raspberry Pi Fan ABS Case with Cooling Fan, Raspberry Pi Heatsink, Simple Removable Top Cover for Pi 3 B+, Pi 3 Model B, Pi 2 Model B - Black
• Raspberry Pi 3 b+ Case, iUniker Raspberry Pi 3 Model B+ Transparent Case with Raspberry Pi Heatsink for Raspberry Pi 3B+, 3B, 2B - Access to All Ports (Clear)
• Adafruit Flex Cable for Raspberry Pi Camera - 24" / 610mm
• HDMI+VGA+DVI+Audio Input LCD Controller Board For HSD190MEN4 M170EN06 17" 19" 1280x1024 4CCFL 30Pins LCD Panel
• Raspberry Pi Camera Module V2-8 Megapixel,1080p
• CERRXIAN 9Inch Mini USB Cable Combo Mini USB Right Angle & Left Angle Male to USB Type A 2.0 Right Angle Male Data Sync and Charge Cable (2-Pack) R
• Raspberry Pi 3 Model B Motherboard (Element 14)