STEPPERONLINE Nema 23 CNC Stepper Motor 2.8A 178.5oz.in/1.26Nm CNC Stepping Motor DIY CNC Mill

This bipolar Nema 23 stepper motor with 1.8 deg. step angle (200 steps/revolution).
Each phase draws 2.8A, allowing for a holding torque of 1.26Nm(178.5oz.in).

Electrical Specification:

* Manufacturer Part Number: 23HS22-2804S
* Motor Type: Bipolar Stepper
* Step Angle: 1.8 deg.
* Holding Torque: 1.26Nm(178.5oz.in)
* Rated Current/phase: 2.8A
* Phase Resistance: 0.9ohms
* Inductance: 2.5mH+/-20%(1KHz)

Physical Specification:

* Frame Size: 57 x 57mm
* Body Length: 56mm
* Shaft Diameter: 6.35mm
* Shaft Length: 20.6mm
* Number of Leads: 4
* Lead Length: 300mm
* Weight: 700g

Connection:

Black(A+), Green(A-), Red(B+), Blue(B-)

Warning:

Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.

• STEPPERONLINE NEMA 23 Stepper Motor (Geared Stepper Motor) Alloy Steel Mounting Bracket ST-M2
• STEPPERONLINE CNC Stepper Motor Driver 1.0-4.2A 20-50VDC 1/128 Micro-step Resolutions for Nema 17 and 23 Stepper Motor
• SMAKN TB6600 Upgraded Version 32 Segments 4A 40V 57/86 Stepper Motor Driver
• 4pcs Nema 23 Stepper Motor Steel Mounting Bracket with Mounting Screws
• STEPPERONLINE Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-lead W/ 1m Cable and Connector compatible with 3D Printer/CNC
• NEWSTYLE 24V 15A Dc Universal Regulated Switching Power Supply 360W for CCTV, Radio, Computer Project
• Witbot DRV8825 Stepper Motor Driver Module 4-Layer with Mini Heat Sink for 3D Printer RP1.4 A4988(Pack of 5pcs)
• SainSmart CNC Router Single 1 Axis 3.5A TB6560 Stepper Stepping Motor Driver Board
• STEPPERONLINE Stepper Motor Nema 17 Bipolar 40mm 64oz.in(45Ncm) 2A 4 Lead 3D Printer Hobby CNC
• SainSmart CNC Micro-Stepping Stepper Motor Driver NEMA23 ST-M5045 2phase 4.5A 24-50V DC 256