Adafruit Accessories Quad Level-Shifter (1 piece)

Level shifting chips let you connect 3V and 5V devices together safely. This chip is similar to others in the shop (such as the 74LVC125) except this one is particularly good at converting 3V logic up to 5V. This is in demand especially when connecting some 3V devices such as the Teensy 3 to NeoPixels! Just power the 74AHCT125 with 5V, it will detect 3V logic properly. You can also use it to connect 5V logic out to 3V logic in, that's when you want to power the 74AHCT125 with 3V, it can safely read 5V logic on the input pins.

To use, apply ~5V power to the VCC pin, common ground to the ground pin, and tie the /OE (output enable) pins to ground. Data goes in on the A pins and goes out on the matching Y pins. Check the datasheet for the pinouts!

• ALITOVE 5V 10A AC to DC Power Supply Adapter Converter Charger 5.5x2.1mm Plug for WS2811 2801 WS2812B LED Strip Pixel Light
• Uxcell BWDYM DC Power Cable Female Connector Plug (Pack of 10)
• JacobsParts 5V 4A 20W Power Adapter for USB Hubs and Other 5V Devices 5.5mm x 2.1mm
• ALITOVE 5V 15A AC to DC Power Supply Adapter Transformer Converter Charger 5.5x2.1mm Plug 100V-240V AC Input for WS2811 2801 WS2812B LED Strip Pixel Light
• Aclorol 5V 10A 50W Power Supply 100V-240V AC to DC Adapter 5V 10 amp Switching Converter Charger 5.5x2.1mm Plug for WS2811 WS2812B WS2813 5V LED Strip Pixel Lights
• ALITOVE 16.4ft WS2812B Individually Addressable LED Strip Light 5050 RGB SMD 150 Pixels Dream Color Waterproof IP67 Black PCB 5V DC
• GenBasic 80 Piece Male to Female 4 and 8 Inch Solderless Ribbon Dupont-Compatible Jumper Wires for Breadboard Prototyping
• ALITOVE 5V 60A 300W Power Supply Transformer Adapter Converter AC110V/220V to DC 5V 60amp Charger for WS2812B WS2811 WS2801 APA102 LED Strip Pixel Light CCTV Camera Security System Computer Project
• 20 Pcs. Nichicon 1000uf 6.3v Capacitor 105c High Temp, Radial Leads
• Adafruit FadeCandy - Dithering USB-Controlled Driver for NeoPixels