5V 4A (4000mA) switching power supply - UL Listed

Need a lot of 5V power? This switching supply gives a clean regulated 5V output at up to 4 Amps (4000mA). 110 or 240 input, so it works in any country. The plugs are "US 2-prong" style so you may need a plug adapter, but you can pick one up at any hardware store for a $1 or so, or you can buy a 'figure-8' cable for your country, also available at any electronics or hardware store.

This cable terminates with a 'standard' 5.5mm OD, 2.1mm ID positive tip connector and with match with our 2.1mm extension cord, female terminal block adapter, breadboard-friendly DC jack, etc.

This adapter is great for use with RGB LED Matrices, NeoPixels, RGB LED pixels or addressable LED strip, etc. Its not good for powering an Arduino thru the DC jack as it requires at least 7.5V - check out our 9V adapter instead!

• Intel Dual Band Wireless-Ac 8265 W/Bt
• 2.54mm Standard Computer Jumper Caps 100pack by CorpCo
• Noctua NF-A4x20 5V PWM, Premium Quiet Fan, 4-Pin, 5V Version (40x20mm, Brown)
• Miayon Jumper Caps Kit, 600PCS 2.54mm Short Circuit Cap Jumper Bridge Plug for Arduino Raspberry Pi PCB PC DVD HDD
• CHAOHANG: New 2 x 6dBi RP-SMA Dual Band 2.4GHz 5GHz + 2 x 35cm M.2(NGFF)Cable Antenna Mod Kit No Soldering use for NGFF Wireless Cards & M.2(NGFF) 3G/4G Cards
• NVIDIA Jetson Nano Developer Kit
• Raspberry Pi Camera Module V2-8 Megapixel,1080p
• INIU 10000 mAh Portable Power Bank LED Display Ultra Compact 2 USB Ports Mobile Charger External Battery Backup Powerbank Compatible with iPhone X 8 7 6s 6 Plus Samsung HTC Cell Phone
• ZYAMY 30pcs 2.54mm Black Jumper Caps Standard Circuit Board Jumper Cap Shunts Short Circuit Connection Pin Blocks
• Adafruit RGB Matrix HAT + RTC for Raspberry Pi - Mini Kit