HiLetgo RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board Support Arduino Mega 2560

Description:
RepRap Mega Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.

Features：
1.It has Cartesian robots and regulations of the extruder .
2.Extended to control other accessories.
3.Heater / MOSFET outputs and three fan thermistor circuit.
4.Integration of additional security 5A and component protection.
5.Control of additional heating bed 11A fuse.
6.Suitable for 5 Pololu stepper driver board.
7.Pololu board pin socket, so they can be easily replaced or removed for future designs.
8.I2C and SPI pins left for future expansion.
9.Hooked into all MOSFET PWM pin versatility.
10.Servo type connector is used to connect to the end stop , the motor and the light-emitting diodes. These connectors are gold-plated , rated current of 3A, very compact.
11.On the SD card to add - is now available from the Kliment - Sdramps.
12.LED indicate when the heater output.
13.Option 2 motors connected to Z Prusa Mendel.

Package Included：
1* RAMPS 1.4 Control Panel 3D Printer Control Board Reprap Control Board

• Elegoo EL-CB-003 MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable for Arduino
• ELEGOO Stepstick Stepper Motor Driver Module A4988 + Heat Sink for 3D Printer Reprap, CNC Machine or Robotics(Pack of 5)
• BIQU A4988 Compatible Stepper StepStick Motor Diver Module with Heat Sink for 3D Printer Controller Ramps 1.4(Pack of 5pcs)
• KINGPRINT 12864 LCD Graphic Smart Display Controller Board with Adapter and Cable for 3D Printer Ramps 1.4 RepRap 3D Printer Mendel Prusa Arduino
• KEYESTUDIO Mega 2560 Board for Arduino +USB Cable
• 5x StepStick DRV8825 Stepper Motor Driver Module for 3D Printer Reprap RP A4988
• SunFounder Mega 2560 R3 ATmega2560-16AU Board Compatible with Arduino
• HESAI RAMPS 1.4 Controller Control Panel for Reprap Mendel Prusa 3D Printer Support Arduino Mega 2560 Devlepment Board
• UEETEK 10pcs 3D Printer Stepper Motor Cable Lead Wire HX2.54 4 pin to 6 pin 1M
• Nema 17 Stepper Motor Bipolar 2A 59Ncm(84oz.in) 48mm Body 4-lead W/ 1m Cable and Connector compatible with 3D Printer/CNC