SmartiPi Touch Back HAT Cover - 15mm deep
📄 Viewing lite version
Full site ›
⌛ 🇨🇦 Canada pricing being fetched…
Prices will appear once fetched — usually within a few minutes.
View in:
🇺🇸 USA
Description ▲
The back HAT cover is a great accessory for the SmartiPi Touch case for the Official Raspberry Pi display. It attaches to the threaded holes on the back of the SmartiPi touch with the four included screws. Once attached it protects HAT boards on the back and also provides more room to mount custom hardware behind the SmartiPi Touch. Be aware that there are no interior mounting points inside the cover and no holes. You will have cut/drill and modify if you would like to create holes for ports on the HAT board or run wires through the cover. Choose from 15mm deep cover and 37mm deep cover.
Similar Products ▼
- SmartiPi Touch case for The Official Raspberry Pi 7" Touchscreen Display - Adjustable Angle
- Raspberry Pi 7" Touch Screen Display
- Element14 Raspberry Pi 3 B+ Motherboard
- Raspberry Pi RASPBERRYPI-SENSEHAT Sense HAT with Orientation, Pressure, Humidity and Temperature Sensors
- CanaKit Raspberry Pi 3 B+ (B Plus) with 2.5A Power Supply (UL Listed)
- Raspberry Pi Camera Module V2-8 Megapixel,1080p
- Battery Pack for Raspberry Pi 3 B+, 4000mAh, Suction
- CanaKit 5V 2.5A Raspberry Pi 3 B+ Power Supply / Adapter (UL Listed)
- CanaKit 2.5A Raspberry Pi 3 B+ Power Supply with CanaKit PiSwitch
- Raspberry Pi 4 with CanaKit Heat Sinks and Micro USB to USB-C Converter (4GB RAM)