Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover

TABIGER Solder Sucker & Solder Wick
It's a must-have tool for electronics kit, you can use them together，solder sucker for large amounts, while the solder wick used in small, hard to reach areas.

How to Use the Solder Sucker:
◆Step 1: Press the plunger down until you hear a click sound;
◆Step 2: Heat up solder around item to be removed by using a soldering iron;
◆Step 3: When the solder is liquid , place the tip of the solder sucker next to the liquid and press press the trigger;
◆Step 4: Repeat this process if necessary.

How to Use the Desoldering Wick:
◆Step 1: Place the wick over the solder you need to be removed and then just push the heated soldering iron tip onto the wick;
◆Step 2: Remove the wick once the solder has been absorbed;
◆Step 3: Cut off the used part of the wick;
◆Step 4: Repeat this process if needed.

Package Included:
1* Solder Sucker
2* Solder Wick

• Hakko 599B-02 Wire-type soldering iron tip cleaner
• SRA Rosin Paste Flux #135 in a 2 oz Jar
• Thermaltronics TMT-TC-2 Lead Free Tip Tinner (20g) in 0.8oz Container
• WYCTIN 60-40 Tin Lead Rosin Core Solder Wire for Electrical Soldering and DIY 0.0236 inches(0.6mm) 0.11lbs
• Hakko FX888D-23BY Digital Soldering Station FX-888D FX-888 (blue & yellow)
• Soldering Iron Tip Cleaner (Black)
• Micro Cutter
• Weller WLC100 40-Watt Soldering Station
• Delcast Rosin Soldering Flux Paste 50G
• Aven 17010 Adjustable Circuit Board Holder