Timiy Tele Guitar Panel Direct Control Plate 3 Way Loaded Switch Wiring Harness Knobs - Chrome

Features:
1. A good quality pre-wired control panel assembly for a telecaster type guitar
2. The panel is 160 x 32mm and is fitted with a three way pickup seletor switch, volume and tone controls with metal knobs
3. The 3 position switch allow switching between neck pickup, bridge pickup or both. The suggested switch wiring is shown in the diagram below
4. The circuit consists of a 250kOhm type B volume control pot and a 250kOhm type A tone control pot which uses a 47nF capacitor to ground

The following connections are required:
- Connect the neck pickup core to switch pins 1 and 2
- Connect the bridge pickup core to switch pins 6 and 7
- Connect the flying lead core and screen to the jack socket
- Connect the bridge and neck pickup screens to the potentiomete cases (ground)

Pakcage Included:1 x Guitar Panel Direct Control Plate

• Fender American Vintage Telecaster Strings-Through-Body String Ferrules
• Timiy Musical Instruments Telecaster Electric 3 Brass Saddle String Guitar Chrome Bridge Assembly
• Electrosocket Jack Plate for Telecasters - Polished Nickel Finish + Switchcraft J11 Mono Jack
• Fender F Neckplate Chrome
• Electric Guitar Pickup Bridge & Neck Pickup for Tele Style
• lotmusic Guitar Tuner (A0594)
• Ogrmar Neck Plate Fender With Crews Chrome Replacement for Electric Guitar 1PCS (1)
• ElectroSocket Jackplate for Tele Chrome
• Musiclily 1/4" 6.35mm Guitar Mono Output Jack Plate Input Socket for Gibson LP Les Paul Electric Guitar, Chrome
• Fender American Series String Guides