KKmoon 2.4 Inch TFT Digital Oscilloscope DIY Kit Handheld with Case SMD Soldered Electronic Learning Set

◕‿◕This DIY digital oscilloscope kit adopts ARM Cortex-M3 processor and with 2.4-inch TFT screen and protective case. It's easy and reliable for circuit operation. It can display waveform parameters, such as frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.

◕‿◕Features:
Can freeze waveform display at any time(HOLD function).
With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.
Waveform storage function: will not lose the waveform after power off.
Short-circuit and open-circuit detection: can help the user find out the soldering error.
TFT controller recognition function.
The SMD has been soldered, more suitable for electronic beginner.

◕‿◕ Notice:
When you receive this DIY kit, please don't solder it before connecting with DC 9V power to test the circuit board, the board is normal if it displays scanning line; if the display is abnormal, please contact us.

◕‿◕Specifications:
Maximum Real-time Sampling Rate: 1MSa/s
Analog Bandwidth: 0-200KHz
Sensitivity Range: 5mV/Div - 20V/Div
Maximum Input Voltage: 50Vpk (1X probe)
Input Impedance: 1M ohms/20pF
Accuracy: 12 Bits
Record Length: 1024 points
Coupling Modes: DC / AC / GND
Time Base Range: 500s/Div - 10us / Div 
Trigger Modes: Auto, Normal, and Single
Trigger Position: Center of Buffer
Supply Voltage: DC 9V(8-10V)
Current Consumption:~120mA @ 9V
Main Board Size: 94 * 65mm / 3.7 * 2.56in
Analog Board Size: 65 * 47mm / 2.56 * 1.85in
Screen Size: 52 * 40mm / 2 * 1.57in
Package Size: 14.5 * 10 * 3.7cm / 5.7 * 3.94 * 1.45in
Package Weight: 179g / 6.33oz

◕‿◕Package List:
1 * Digital Oscilloscope DIY Kit
1 * Probe
1 * DIY Case
3 * User Manual(English)

• Signal Generator DIY Kit, KKmoon XR2206 High Precision Function Signal Generator DIY Kit Sine/Triangle/Square Output 1Hz-1MHz Adjustable Frequency
• 5pack 9v Battery Clip with 2.1mm X 5.5mm Male DC Plug for Arduino by Corpco
• Multifunction Meter DIY kit, kuman Mega 328 Graphic transistor Tester, NPN PNP Diodes Triode Capacitor ESR SCR MOSFET Resistor Inductance LCD Display Checker with case and screwdriver K77
• Elenco TL-3 BNC to Minigrabber Test Lead Set
• AUSTOR 100 Pcs PCB Board Kit Including 30 Pcs Double Sided Prototype Boards and 30 Pcs 40 Pin 2.54mm Male and Female Header Connector(Bonus: 10 Pcs 2P&3P Screw Terminal Blocks and 30 Pcs Jumper Caps)
• 9V AC/DC Power Adapter for Arduino/Schwinn Bike Exercise Elliptical Recumbent Upright Trainer/Crosley Cruiser Record Player - UL Listed Center Positive 5.5 x 2.1mm Power Supply Cord for UNO R3
• Aven 17010 Adjustable Circuit Board Holder
• XR2206 Function Generator - kuman Updated XR2206 DIY Kit Signal Generator with Screwdriver and Jumper Wires Cable - Sine Triangle Square Output 1Hz-1MHz Adjustable Frequency Amplitude K76
• BOENFU Wire Flush Cutter 5 Inch 2 Pack Micro Diagonal Cutting Pliers for Electronics and Jewelry Making Black
• 12864 Mega328 ESR Transistor Resistor Diode Capacitor Mosfet Tester w/Test hook