RTL-SDR Blog Wideband Low Noise Amplifier Bias Tee Powered

Includes 1x RTL-SDR Blog Wideband LNA (Bias Tee Powered) and 1x SMA male to SMA male adapter. This is a general purpose SPF5189Z based wideband LNA. Works from 50 MHz to 4 GHz with a noise figure of less than 1dB and a gain of 18.7dB @ 900 MHz. Requires bias tee power, but there is an internal header which can be used to switch to external power, although you won't be able to use the enclosure in that case. Note if you're looking to improve ADS-B performance we recommend our Triple Filtered ADS-B LNA. Please note again: Requires 3 - 5v bias tee power. The RTL-SDR V3 provides 4.5v so is suitable.

• RTL-SDR Blog R820T2 RTL2832U 1PPM TCXO SMA Software Defined Radio with 2x Telescopic Antennas
• Broadcast FM Block Filter (88 - 108 MHz Block) by RTL-SDR Blog
• RTL-SDR Blog R820T2 RTL2832U 1PPM TCXO SMA Software Defined Radio (Dongle Only)
• DZS Elec 2pcs RG316 Wire Jumper 15cm SMA Male to SMA Male with Connecting Line RF Coaxial Coax Cable Antenna Extender Cable Adapter Jumper
• Nooelec SAWbird+ GOES Barebones - Premium Saw Filter & Cascaded Ultra-Low Noise LNA Module for NOAA (GOES/LRIT/HRIT) Applications. 1688MHz Center Frequency.
• ADS-B LNA High Performance Triple Filter Low NF Amplifier by RTL-SDR Blog
• exgoofit F-Type to SMA Male Female 2 Sets 6pcs RF Coaxial Coax Adapter Connector
• Broadcast AM Reject High Pass Filter (2.6 MHz HPF) by RTL-SDR Blog
• Ham It Up Plus - HF/MF/LF/VLF/ULF Upconverter w/TCXO & Separate Noise Source Circuit. Fully Assembled in Custom Metal Enclosure. Extends The Frequency Range of Your Favorite Radio Down to 300Hz.
• ADS-B 1090MHz Band-Pass SMA Filter