This obd2 scanner could resolve most reasons which caused engine light on, and tell you what's wrong with your car engine, and if it is necessary to be sent to workshop. The car diagnostic tool supports Reading DTCs, displaying Live Data, Freeze Frame & I/M Readiness etc to figure out the root cause of the Check Engine Light (CEL) and turning it off, to help you detect any potential problems, save your time and money.
Where's the OBD II interface?
The OBD 2 port is often under the dash, or under a panel below the handbrake in the center console.
How to Use it?
Just simply plug into the OBD II port on your car and turn ignition on then read the car's vehicle information with the reader.
Why I can't erase the fault code?
The problem causing the error code must be repaired first then code can disappear.
Product Specification:
V310 Display: 128 x 64 pixel
Working Temperature: 0～60℃（32～140℉）
Storage Temperature:-20～70℃（-4～158℉）
Working Voltage: DC 9-16V
Working Current: 80mA
Package Included:
1 x OBD2 Scanner Code Reader
1 x User Manual
Warm Tips:
1. Must be 16 PIN OBD II port;
2. This OBD2 scanner only supports petrol vehicles;
3. This scanner is valid only for the engine system, not for airbags, ABS and other systems.
4.Have any questions, please contact us freely.