CCNA Routing and Switching 200-125 Network Simulator

CCNA Routing and Switching interactive learning:

More than 250 labs

More than 5,000 hands-on tasks

Four Kinds of Labs:

Skill Builders

Subnetting Exercises

Configuration Scenarios

Troubleshooting Scenarios

The CCNA Routing and Switching 200-125 Network Simulator is a single-user software package. It helps users develop and improve hands-on configuration and troubleshooting skills without the investment in expensive lab

hardware. This state-of-the-art, interactive simulation software enables you to practice your networking skills with more than 400 structured labs designed to help you learn by doing, the most effective method of learning.

Experience realistic network device responses as you perform each lab, which include detailed instructions, topology diagrams, critical-thinking questions, hints, and answers. Working through the labs, you will quickly become proficient with all the common Cisco IOS version 15 router and switch commands on the CCNA exam. Unlike other simulators on the market, the lab scenarios included in the CCNA R&S 200-125 Network Simulator are far more complex, challenging you to learn how to perform real-world network configuration and troubleshooting tasks.

Master the hands-on skills needed to succeed on the CCNA exam, including:

Router and switch navigation and administration

Ethernet LAN switches

VLANs, trunking, and switch security

Connected and static routes

RIPv2 configuration and verification

Access Control Lists (ACL)

NAT, syslog, and NTP configuration

IPv4 and IPv6 addressing and subnetting

Network troubleshooting

STP and VTP

OSPF and EIGRP on IPv4 and IPv6

External BGP

Point-to-point WANs and private WANs

HSRP

Network management

Skill Builders:

These 250+ labs are narrowly focused, enabling you to practice your configuration skills on a single topic. Coverage includes:

Router and switch CLI navigation

Configuring IP addresses and DHCP

servers

VLAN and trunking configuration

Switch security

STP, VTP, Portfast, and BPDU guard configuration

Static and dynamic EtherChannel

Serial configuration and authentication

Connected, static, and default routes

RIPv2, OSPF, and EIGRP configuration

eBGP and MPLS

ACL analysis and configuration

NAT configuration

Syslog, NTP, HSRP, GRE tunnels, SNMP, IP SLA, and SPAN

Subnetting Exercises:

These 80 labs help you to perform subnetting calculations quickly and accurately, a critical skill for success on the CCNA exam. Topics covered include:

IPv4 and IPv6 subnet ID calculation

IP address rejection

IP route selection

VLSM overlaps

IPv6 EUI-64 calculation

Selecting VLSM routes

Configuration Scenarios:

These 50+ labs are more broadly focused, combining multiple technologies into configuration scenarios that mimic real-world environments. These labs are longer and more complex, challenging you to put your configuration skills

to the test. Topics covered include:

Network fundamentals and administration

IP addressing

STP and VTP

Static and default routing

Serial link configuration

RIPv2, OSPF, and EIGRP

Router-on-a-stick to MLS

Standard and extended ACLs

NAT configuration

HSRP

Troubleshooting Scenarios:

These 30 labs present typical troubleshooting scenarios and require you to explore the misconfigured network, isolate the issues, and correct the problems. These are very complicated and realistic scenarios that truly test

your ability to perform the job of a network engineer. Topics covered include:

Switch forwarding

VLAN troubleshooting

Path analysis and troubleshooting

Port security

STP

Network discovery

IP addressing and routing

DHCP server troubleshooting

NAT

EIGRP and OSPF

IPv6, MLS, and GRE tunnels

Router-on-a-stick

System requirements:

Windows system requirements (minimum):

Windows 10 (32/64-bit), Windows 8.1 (32/64-bit), or Windows 7 (32/64-bit)

1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor

1 GB RAM (32-bit) or 2 GB RAM (64-bit)

16 GB available hard disk space (32-bit) or 20 GB (64-bit)

DirectX 9 graphics device with WDDM 1.0 or higher driver

Adobe Acrobat Reader version 8 and above

Mac system requirements (minimum):

macOS 10.12, 10.11, or 10.10

Intel core Duo 1.83 GHz

512 MB RAM (1 GB recommended)

1.5 GB hard disk space

32-bit color depth at 1024x768 resolution

Adobe Acrobat Reader version 8 and above