![Atmospheric corrosion effects of HNO"3-Influence of temperature and relative humidity on laboratory-exposed copper [An article from: Atmospheric Environment]](https://www.ebooknetworking.net/books/B00/0PD/bigB000PDSWWU.jpg)
Atmospheric corrosion effects of HNO"3-Influence of temperature and relative humidity on laboratory-exposed copper [An article from: Atmospheric Environment]
Description
This digital document is a journal article from Atmospheric Environment, published by Elsevier in 2007. The article is delivered in HTML format and is available in your Amazon.com Media Library immediately after purchase. You can view it with any web browser.
Description:
The effect of HNO"3 on the atmospheric corrosion of copper has been investigated at varied temperature (15-35^oC) and relative humidity (0-85% RH). Fourier transform infrared (FT-IR) spectroscopy and X-ray diffraction (XRD) confirmed the existence of cuprite and gerhardtite as the two main corrosion products on the exposed copper surface. For determination of the corrosion rate and for estimation of the deposition velocity (V"d) of HNO"3 on copper, gravimetry and ion chromatography has been employed. Temperature had a low effect on the corrosion of copper. A minor decrease in the mass gain was observed as the temperature was increased to 35^oC, possibly as an effect of lower amount of cuprite due to a thinner adlayer on the metal surface at 35^oC. The V"d of HNO"3 on copper, however, was unaffected by temperature. The corrosion rate and V"d of HNO"3 on copper was the lowest at 0% RH, i. e. dry condition, and increased considerably when changing to 40% RH. A maximum was reached at 65% RH and the mass gain remained constant when the RH was increased to 85% RH. The V"d of HNO"3 on copper at >=65% RH, 25^oC and 0.03cms^-^1 air velocity was as high as 0.15+/-0.03cms^-^1 to be compared with the value obtained for an ideal absorbent, 0.19+/-0.02cms^-^1. At sub-ppm levels of HNO"3, the corrosion rate of copper decreased after 14d and the growth of the oxide levelled off after 7d of exposure.
Description:
The effect of HNO"3 on the atmospheric corrosion of copper has been investigated at varied temperature (15-35^oC) and relative humidity (0-85% RH). Fourier transform infrared (FT-IR) spectroscopy and X-ray diffraction (XRD) confirmed the existence of cuprite and gerhardtite as the two main corrosion products on the exposed copper surface. For determination of the corrosion rate and for estimation of the deposition velocity (V"d) of HNO"3 on copper, gravimetry and ion chromatography has been employed. Temperature had a low effect on the corrosion of copper. A minor decrease in the mass gain was observed as the temperature was increased to 35^oC, possibly as an effect of lower amount of cuprite due to a thinner adlayer on the metal surface at 35^oC. The V"d of HNO"3 on copper, however, was unaffected by temperature. The corrosion rate and V"d of HNO"3 on copper was the lowest at 0% RH, i. e. dry condition, and increased considerably when changing to 40% RH. A maximum was reached at 65% RH and the mass gain remained constant when the RH was increased to 85% RH. The V"d of HNO"3 on copper at >=65% RH, 25^oC and 0.03cms^-^1 air velocity was as high as 0.15+/-0.03cms^-^1 to be compared with the value obtained for an ideal absorbent, 0.19+/-0.02cms^-^1. At sub-ppm levels of HNO"3, the corrosion rate of copper decreased after 14d and the growth of the oxide levelled off after 7d of exposure.
