Catalytic wet oxidation of phenol in a trickle bed reactor [An article from: Chemical Engineering Journal]

This digital document is a journal article from Chemical Engineering Journal, published by Elsevier in 2004. The article is delivered in HTML format and is available in your Amazon.com Media Library immediately after purchase. You can view it with any web browser.

Description:
Catalytic liquid phase oxidation of aqueous phenol was studied in a pilot plant trickle bed reactor using a copper oxide catalyst supported on alumina. Catalysts were prepared by impregnating CuO on alumina extrudates and on computer designed shape (CDS) alumina pellets. Phenol oxidation was carried out in a 2.54cm diameter reactor with a catalyst bed length of 60cm and in the pressure range of 1-15atm and temperature range of 373-403K Compared to alumina extrudates higher phenol conversion was achieved over CDS pellets under identical conditions. Phenol oxidation reaction was strongly affected by the temperature and pressure, however, pressure had less effect. Hydrodynamics of the reactor had strong influence on phenol oxidation reaction. A one dimensional axial dispersion model was proposed to simulate the experimental results. The model satisfactorily explains the experimental results with a deviation of +/-15%.