Development of an integrally skinned ultrafiltration membrane for wastewater treatment: effect of different formulations of PSf/NMP/PVP on flux and rejection [An article from: Desalination]

This digital document is a journal article from Desalination, published by Elsevier in . The article is delivered in HTML format and is available in your Amazon.com Media Library immediately after purchase. You can view it with any web browser.

Description:
Integrally skinned ultrafiltration (UF) membranes for wastewater treatment were prepared by the phase-inversion process with an immersion precipitation technique to investigate the effect of different formulations on UF performance. Three new polymer solutions were used, consisting of polysulfone (PSf), 1-methyl-2-pyrrolidone (NMP) and polyvinylpyrrolidone (PVP). The polymer solution was formulated by varying polymer concentration, which is for PSf in the range of 18-22 wt%. Polyethylene glycols (PEG) with varying molecular weights were used to characterize the flux and rejection of the membrane. Results showed that the flux of the membrane decreased from 70.77 to 32.82 L/m^2h while the separation performance for particle solutes increased from 10.31 to 33.89% at 2.5 bar with an increase in polymer concentration. This means that the outer skin layer of the membranes became apparently thicker and denser with increasing polymer concentration. On the other hand, an UF membrane from a dilute polymer solution produced a thin and porous skin layer, leading to a high value of flux but a relatively low percentage of rejection for PEG.