ISO 898-5:1998, Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners not under tensile stresses

This part of ISO 898 specifies the mechanical properties of set screws and similar threaded fasteners not under tensile stresses with nominal thread diameters from 1,6 mm up to and including 24 mm, which are made of carbon steel or alloy steel.The mechanical and physical properties apply when tested at an ambient temperature of 10 �C to 35 �C and will vary at higher or lower temperatures.This part of ISO 898 does not apply to set screws requiring special properties such asspecified tensile stresses (see ISO 898-1); weldability; corrosion resistance; ability to withstand temperatures above + 300 �C or below − 50 �C. This title may contain less than 24 pages of technical content.