A general correlation for heat transfer during saturated boiling with flow across tube bundles.(Technical report): An article from: HVAC & R Research
Book Details
Author(s)M. Mohammed Shah
PublisherThomson Gale
ISBN / ASINB000Y75DBA
ISBN-13978B000Y75DB0
MarketplaceIndia 🇮🇳
Description
This digital document is an article from HVAC & R Research, published by Thomson Gale on September 1, 2007. The length of the article is 9001 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.
From the author: Presented here is a dimensionless correlation for predicting heat transfer on individual tubes of a bundle that can be used with predictive models for bundle heat transfer such as that of Brisbane et al. (1980). The new correlation shows good agreement with data for single tubes and tube bundles from many sources covering a wide range of parameters, including seven fluids (water, n-pentane, R-11, R-12, R-113, R-123, and R-134a), reduced pressures from 0.005 to 0.189, mass velocities from 1.3 to 1391 kg/[m.sup.2]s, heat flux from 1 to 1000 kW/[m.sup.2], tube diameters from 3 to 25.4 mm, and pitch to diameter ratios from 1.17 to 1.5. A total of 690 data points are correlated with a mean deviation of 15.2%. The results of comparisons of the new correlation with test data are presented and discussed
Citation Details
Title: A general correlation for heat transfer during saturated boiling with flow across tube bundles.(Technical report)
Author: M. Mohammed Shah
Publication:HVAC & R Research (Magazine/Journal)
Date: September 1, 2007
Publisher: Thomson Gale
Volume: 13 Issue: 5 Page: 749(20)
Article Type: Technical report
Distributed by Thomson Gale
From the author: Presented here is a dimensionless correlation for predicting heat transfer on individual tubes of a bundle that can be used with predictive models for bundle heat transfer such as that of Brisbane et al. (1980). The new correlation shows good agreement with data for single tubes and tube bundles from many sources covering a wide range of parameters, including seven fluids (water, n-pentane, R-11, R-12, R-113, R-123, and R-134a), reduced pressures from 0.005 to 0.189, mass velocities from 1.3 to 1391 kg/[m.sup.2]s, heat flux from 1 to 1000 kW/[m.sup.2], tube diameters from 3 to 25.4 mm, and pitch to diameter ratios from 1.17 to 1.5. A total of 690 data points are correlated with a mean deviation of 15.2%. The results of comparisons of the new correlation with test data are presented and discussed
Citation Details
Title: A general correlation for heat transfer during saturated boiling with flow across tube bundles.(Technical report)
Author: M. Mohammed Shah
Publication:HVAC & R Research (Magazine/Journal)
Date: September 1, 2007
Publisher: Thomson Gale
Volume: 13 Issue: 5 Page: 749(20)
Article Type: Technical report
Distributed by Thomson Gale
