Preparations of microencapsulated PCMs-coated nylon fabrics by wet and dry coating process and comparison of their properties.(phase change ... article from: Polymer Engineering and Science
Book Details
PublisherSociety of Plastics Engineers, Inc.
ISBN / ASINB002HMJNG6
ISBN-13978B002HMJNG0
MarketplaceFrance 🇫🇷
Description
This digital document is an article from Polymer Engineering and Science, published by Society of Plastics Engineers, Inc. on June 1, 2009. The length of the article is 4017 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available immediately after purchase. You can view it with any web browser.
From the author: To analyze the thermal insulation effect in textiles, waterproof, and breathable nylon fabrics PCMs microcapsules (PCMMcs) were prepared by wet and dry coating processes. The morphology, water vapor permeability (WVP), water penetration resistance (WPR), and peel strength of the PCMMcs-coated fabrics were characterized. At the same time, DSC was used to measure the thermal insulation properties of the PCMMcs-treated fabrics as a means of testing the thermal storage/ release capacity according to their phase change temperature. The result showed that the heat storage capacity of the PCMMcs-treated fabrics prepared by wet coating was noticeably better than that of the PCMMcs-untreated samples, whereas the PCMMcs treatment had an insignificant effect on the heat capacity of the fabrics prepared by the dry coating process. From the SEM analysis, it was found that the PCMMcs were physically unstable during the dry coating process, so, they could not be observed. Also, the WVP, WPR, and peel strength were found to decrease with increasing PCMMcs contents. POLYM. ENG. SCI., 49:1151-1157, 2009. [C]2009 Society of Plastics Engineers
Citation Details
Title: Preparations of microencapsulated PCMs-coated nylon fabrics by wet and dry coating process and comparison of their properties.(phase change materials)(Report)
Author: K. Koo
Publication:Polymer Engineering and Science (Magazine/Journal)
Date: June 1, 2009
Publisher: Society of Plastics Engineers, Inc.
Volume: 49 Issue: 6 Page: 1151(7)
Article Type: Report
Distributed by Gale, a part of Cengage Learning
From the author: To analyze the thermal insulation effect in textiles, waterproof, and breathable nylon fabrics PCMs microcapsules (PCMMcs) were prepared by wet and dry coating processes. The morphology, water vapor permeability (WVP), water penetration resistance (WPR), and peel strength of the PCMMcs-coated fabrics were characterized. At the same time, DSC was used to measure the thermal insulation properties of the PCMMcs-treated fabrics as a means of testing the thermal storage/ release capacity according to their phase change temperature. The result showed that the heat storage capacity of the PCMMcs-treated fabrics prepared by wet coating was noticeably better than that of the PCMMcs-untreated samples, whereas the PCMMcs treatment had an insignificant effect on the heat capacity of the fabrics prepared by the dry coating process. From the SEM analysis, it was found that the PCMMcs were physically unstable during the dry coating process, so, they could not be observed. Also, the WVP, WPR, and peel strength were found to decrease with increasing PCMMcs contents. POLYM. ENG. SCI., 49:1151-1157, 2009. [C]2009 Society of Plastics Engineers
Citation Details
Title: Preparations of microencapsulated PCMs-coated nylon fabrics by wet and dry coating process and comparison of their properties.(phase change materials)(Report)
Author: K. Koo
Publication:Polymer Engineering and Science (Magazine/Journal)
Date: June 1, 2009
Publisher: Society of Plastics Engineers, Inc.
Volume: 49 Issue: 6 Page: 1151(7)
Article Type: Report
Distributed by Gale, a part of Cengage Learning
