Thermal environment around strong heat source with single-sided natural ventilation.(Report): An article from: ASHRAE Transactions
Book Details
Author(s)Dong Liu, Siwei Li, Qing Miao
ISBN / ASINB003QN3ZNC
ISBN-13978B003QN3ZN0
MarketplaceFrance 🇫🇷
Description
This digital document is an article from ASHRAE Transactions, published by American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Inc. on January 1, 2010. The length of the article is 4837 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available immediately after purchase. You can view it with any web browser.
From the author: A test model has been built in order to analyze how a strong heat source (SHS) influences its surrounding thermal environment with single-sided natural ventilation. Through a study about how the air temperature distributes around the heat source, particularly when the heat source was located in three locations--in the center of the test model room, near the inlet and comparatively far away from the inlet, a conclusion can be drawn that three factors, heat release rate of the SHS, air distribution with single-sided natural ventilation and the location of the heat source, have a great impact on the surrounding thermal environment. Furthermore, if the heat release rate of the heat source is fixed, the other two above-mentioned factors would take in charge instead. Furthermore, the air-temperature in the leeward side appears a little higher than that in the windward side. Combined the experiment and some fieldwork results, it is easy to draw the conclusion that when the heat source is located comparatively far away from the inlet, the temperature around the heat source would rise approximately linearly with height. The result is consistent with the CFD simulation.
Citation Details
Title: Thermal environment around strong heat source with single-sided natural ventilation.(Report)
Author: Dong Liu
Publication:ASHRAE Transactions (Magazine/Journal)
Date: January 1, 2010
Publisher: American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Inc.
Volume: 116 Issue: 1 Page: 284(9)
Article Type: Report
Distributed by Gale, a part of Cengage Learning
From the author: A test model has been built in order to analyze how a strong heat source (SHS) influences its surrounding thermal environment with single-sided natural ventilation. Through a study about how the air temperature distributes around the heat source, particularly when the heat source was located in three locations--in the center of the test model room, near the inlet and comparatively far away from the inlet, a conclusion can be drawn that three factors, heat release rate of the SHS, air distribution with single-sided natural ventilation and the location of the heat source, have a great impact on the surrounding thermal environment. Furthermore, if the heat release rate of the heat source is fixed, the other two above-mentioned factors would take in charge instead. Furthermore, the air-temperature in the leeward side appears a little higher than that in the windward side. Combined the experiment and some fieldwork results, it is easy to draw the conclusion that when the heat source is located comparatively far away from the inlet, the temperature around the heat source would rise approximately linearly with height. The result is consistent with the CFD simulation.
Citation Details
Title: Thermal environment around strong heat source with single-sided natural ventilation.(Report)
Author: Dong Liu
Publication:ASHRAE Transactions (Magazine/Journal)
Date: January 1, 2010
Publisher: American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Inc.
Volume: 116 Issue: 1 Page: 284(9)
Article Type: Report
Distributed by Gale, a part of Cengage Learning
