Drawing and ultimate tensile properties of modified polyamide 6 fibers.(Report): An article from: Polymer Engineering and Science
Book Details
PublisherSociety of Plastics Engineers, Inc.
ISBN / ASINB004WMKWE6
ISBN-13978B004WMKWE8
AvailabilityAvailable for download now
MarketplaceUnited States 🇺🇸
Description
This digital document is an article from Polymer Engineering and Science, published by Society of Plastics Engineers, Inc. on April 1, 2011. The length of the article is 5737 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available immediately after purchase. You can view it with any web browser.
From the author: The drawing and ultimate tensile properties of the modified PA 6 (MPA) fiber specimens prepared at varying drawing temperature were systematically investigated, wherein the MPA resins were prepared by reactive extrusion of PA 6 with the compatibilizer precursor (CP). At any fixed drawing temperature, the achievable draw ratio ([D.sub.ra]) values of MPA as-spun fiber specimens increase initially with increasing CP contents, and then approach a maximum value, as their CP contents are close to the 5 wt% optimum value. The maximum [D.sub.ra] values obtained for MPA as-spun fiber specimens prepared at the optimum CP content reach another maximum as their drawing temperatures approach the optimum drawing temperature at 120[degrees]C. The tensile and birefringence values of PA 6 and MPA fiber specimens improve consistently as their draw ratios increase. Similar to those found for their achievable drawing properties, the ultimate tensile and birefringence values of MPA fiber specimens approach a maximum value, as their CP contents and drawing temperatures approach the 5 wt% and 120 [degrees]C optimum values, respectively. Investigations including Fourier transform infrared, melt shear viscosity, gel content, thermal and wide angle X-ray diffraction experiments were performed on the MPA resin and/or fiber specimens to clarify the optimum CP content and possible deformation mechanisms accounting for the interesting drawing, birefringence, and ultimate tensile properties found for the MPA fiber specimens prepared in this study. POLYM. ENG. SCI., 51:755-763, 2011. [c]2011 Society of Plastics Engineers
Citation Details
Title: Drawing and ultimate tensile properties of modified polyamide 6 fibers.(Report)
Author: Wei Wei
Publication:Polymer Engineering and Science (Magazine/Journal)
Date: April 1, 2011
Publisher: Society of Plastics Engineers, Inc.
Volume: 51 Issue: 4 Page: 755(9)
Article Type: Report
Distributed by Gale, a part of Cengage Learning
From the author: The drawing and ultimate tensile properties of the modified PA 6 (MPA) fiber specimens prepared at varying drawing temperature were systematically investigated, wherein the MPA resins were prepared by reactive extrusion of PA 6 with the compatibilizer precursor (CP). At any fixed drawing temperature, the achievable draw ratio ([D.sub.ra]) values of MPA as-spun fiber specimens increase initially with increasing CP contents, and then approach a maximum value, as their CP contents are close to the 5 wt% optimum value. The maximum [D.sub.ra] values obtained for MPA as-spun fiber specimens prepared at the optimum CP content reach another maximum as their drawing temperatures approach the optimum drawing temperature at 120[degrees]C. The tensile and birefringence values of PA 6 and MPA fiber specimens improve consistently as their draw ratios increase. Similar to those found for their achievable drawing properties, the ultimate tensile and birefringence values of MPA fiber specimens approach a maximum value, as their CP contents and drawing temperatures approach the 5 wt% and 120 [degrees]C optimum values, respectively. Investigations including Fourier transform infrared, melt shear viscosity, gel content, thermal and wide angle X-ray diffraction experiments were performed on the MPA resin and/or fiber specimens to clarify the optimum CP content and possible deformation mechanisms accounting for the interesting drawing, birefringence, and ultimate tensile properties found for the MPA fiber specimens prepared in this study. POLYM. ENG. SCI., 51:755-763, 2011. [c]2011 Society of Plastics Engineers
Citation Details
Title: Drawing and ultimate tensile properties of modified polyamide 6 fibers.(Report)
Author: Wei Wei
Publication:Polymer Engineering and Science (Magazine/Journal)
Date: April 1, 2011
Publisher: Society of Plastics Engineers, Inc.
Volume: 51 Issue: 4 Page: 755(9)
Article Type: Report
Distributed by Gale, a part of Cengage Learning
