Guitar Notched Straight Edge and FRET ROCKER

Includes Notched Straight Edge and Fret Rocker Leveler: Designed to check guitar neck straightness of the fretboard and not just The frets. This is the only true way to check for straightness before leveling your frets. Essential for proper truss rod adjustment. 1/8"x1.5"x18.5" Machined Edge 6061 Aluminum. This is very rigid and will last for years without bending. One side is for 25.5" (Fender) scale guitars, and the other side is for 24.75" (Gibson) scale guitars. We wanted to make this tool affordable not only for guitar techs but players as well, so there is no fancy engraving, etc. CNC precision machined for a flatness of +/- .001" Good to use with 21, 22 or 24 fret necks..doesn't matter. Use with strings on or off. Notched to the 22nd fret with clearance for more frets. --Fret Rocker-- Precision CNC Machined 4 sided Fret Level Rocking Tool allows you to check for high frets on your guitar/bass fretboard and eliminating fret buzz, by setting on three fret at once and try rocking back and forth to see if that center fret (of the three) is high. Very simple to use and with 4 different length sides you can check all down the fretboard of all electric, acoustic and bass guitars. You will be surprised on your initial results when you first use this tool on your instrument. Our tool consists of 4 Precision Sides 1 5/16", 2", 3" and 4" Machined from 1/8" thick 6061 Aluminum plate. Flatness within .0002". ----------The straight edge is also sold separately.