Outdoor HDTV Antenna-Antop 400-BV Flat Panel Amplified Antenna with Noise-Free 4G Filter for VHF Enhanced, 70 Miles Multi-Directional Reception Range, 39ft Detachable Coaxial Cable, Waterproof

Disclaimer Channel reception quality will vary depending on what’s being broadcast in your area, how far away you are from broadcast towers, and your surroundings. Always re-scan channels after moving the indoor antenna, the result may be better. BEFORE PURCHASING this antenna, please CHECK OUT what channels are available in your area via: hdtv. gov/maps. Outdoor TV Antenna Features 1. Fast setup with included tools. 2. Unique Thanksgiving Gift and Christmas Gift for everyone on your list to help them Cut-the- -Cord and enjoy free TV channels. 3. Multiple Installation: outdoor antenna, indoor antenna, attic antenna, roof antenna, etc., . Specification: Frequency range: VHF: 87. 5-230MHz, UHF: 470-700MHz Gain: 10dB or 33dB Max Output Level: 100dB?V Impedance: 75? Noise figure: ?3. 5dB Reception Pattern: Multi-directional Polarization: Horizontal/Vertical Smart Switch - Off: non-amplified Smart Switch - On: amplified with DC 12V via power adapter Kindly Note ?The antenna is a little bit heavy, so please pay attention to your safety during the installation. If your outdoor TV antenna is not working as expected, try the following tips: 1, Check to make sure you have correctly connected the antenna to your HDTV or third-party HD receiver. 2, Re-scan for channels: In the TV's setup menu, set the mode to indoor antenna or air. Refer to the TV manual for detailed instructions. 3, Reposition the amplifier antenna in a different location. It is suggested place it higher on a attic or outside. Sometimes moving a few feet can make a difference. 4, You can receive Hi-V signals when you install the detachable rods.