Aeotec Water Sensor 6 Zwave Water Sensor Z-Wave Plus Enabled Home Security Zwave Leak Sensor Smart Zwave Temperature Freeze Flood Sensor (Water Sensor 6)

Protect your home from flooding or expensive water damage with the Aeotec Z-Wave Water Sensor 6. The Water Sensor informs you of the presence of unwanted water in sensitive areas, along with monitoring the surrounding area with additional built-in sensors. The Water Sensor 6 can detect as little as 0.5mm or 0.02 in of water in a designated area. This level of sensitivity gives you the maximum amount of time to respond to an alert before serious damage occurs. The Water Sensor 6 can be programmed to work with smart water valves or electronic sump pumps to seal shut in case of a pipe burst or leak, or even coordinate with Z-Wave controllers to shut off electronics to prevent electrical shortages. SPECIFICATIONS: Manufacturer Part #: ZW122.Dimensions: 3.8 cm (w) x 2.4cm (H). Buzzer Max Volume: 60db from 2 meters. Sensors: Air Temperature, Water Flow. Supported Notification Types: Heat Alarm, Home Security, Water Alarm. Power Supply: CR123A Lithium Battery, 3v / 1500mA. Repeater: No. Operating Humidity: 8% to 80%. Operating Temperature: 0°C to 40°C (32°F to 104°F).. Storage Temperature: -20°C to 60°C. Waterproofing: IP65 rating. Battery Life: CR123A, 3V, 1500mAh. 2 to 3 years with default setting with estimated leakage events 5 times per month. Operating Distance: Up to 492 feet (150 meters) outdoors. Warranty: 1 Year.