BESTEK Dash Cam Hardwire Kit with Motion Detection Sensor, 12V 24V to 5V/2A OBD-II Dash Cam Hardwire Kit with 9.4ft/2.85m Wire, Low Voltage Protection Compatible with Mini USB Dash Cams, GPS Navigator

Name: BESTEK Dash Cam Hardwire Kit with Motion Detection Sensor, 12V 24V to 5V/2A OBD-II Dash Cam Hardwire Kit with 9.4ft/2.85m Wire, Low Voltage Protection Compatible with Mini USB Dash Cams, GPS Navigator
Author: BESTEK
ISBN: 978B07P2VYNN5

AuthorBESTEK

PublisherBESTEK

CategoryWireless Phone Accessory

Shop on Amazon — choose your country

🇺🇸 USA 🇨🇦 Canada 🇬🇧 UK 🇩🇪 Germany 🇫🇷 France 🇮🇳 India

Buy New on Amazon 🇺🇸

Currently unavailable.

Book Details

Author(s)BESTEK

PublisherBESTEK

ISBN / ASINB07P2VYNNM

ISBN-13978B07P2VYNN5

AvailabilityCurrently unavailable.

CategoryWireless Phone Accessory

MarketplaceUnited States 🇺🇸

Description

Wide Compatibility: This dash cam hardwire kit is suitable for most 12V and 24V vehicles, compatible with all the 2 amps input Mini USB（not for Micro USB） dash cam, mirror cam, GPS navigator and radar detector etc. Works with most of the APEMAN, CHORTAU, Vantrue, Nexar, Falcon, Aukey, VAVA and other Mini USB dash cam.
Easy Setup: No extra electrical wiring or tools needed to install this kit, just plug into the OBD-II port. You can adjust the position of the 9.4ft/2.85m line at will to get the most comfortable installation.
Wide Sensing Range: 19.7ft/6m long detection distance and in front 150° induction angle. Instantly turns on the dash cam when motion is detected, shuts off automatically within 30 seconds after motion is not detected.
24 Hours Surveillance: This kit uses international universal type OBD II port (with on/off power switch) instead of cigarette lighter port, which will release cigarette lighter for other electronic devices, can supply power for dash camera for 24 hours uninterruptedly. The motion detection function let your dash cam record when at needs. Built-in safeguards protect your device from overcurrent, overvoltage and overheating damage.
Battery Drain Protection: This kit will continuous power your car devices, but when your vehicle’s battery voltage drops to 11.6V or 23.6V, the regulator will cut off the power, for the purpose to leave enough power to start up your engine, this also called Low Voltage Protection. You can also turn off the power switch if you don't need to record.