LBTbate ELPLP67 V13H010L67 Replacement Projector Lamp for EPSON PowerLite Home Cinema 710 750HD EX7210 EX3210 EX3212 EX5210 H429A VS210 VS220 MG-850HD PowerLite1221 1261W EB-S02 K85 Projector Bulbs
Book Details
PublisherLBT GROUP
ISBN / ASINB07TMMXVDT
ISBN-13978B07TMMXVD1
AvailabilityIn Stock.
Sales Rank99,999,999
MarketplaceUnited States 🇺🇸
Description
This is a premium quality wick, high brightness, long life replacement projector lamp. installed in your projector, so you appreciate the effect of the original lights.
Please Note:
Before purchaseplease make sure that this projector lamp/bulb is compatible with your projector. If you do not find your projector model on the page, contact us to confirm.
About Product:
LBTGROUP has own factory and many experienced workers.Every lamp lamp will be test before leaving factory. So you don't need to doubt the quality. and we can solve any after-sales problems and guide the installation.
Installation Step:
1.Turn off the projector and disconnect the power cord.
2.Let the projector cool for at least 30 minutes.
3.Use a screwdriver to remove the screw from the cover.
4.Remove the cover and the lamp protection film.
5.Loose the screws of the lamp.
6.Pull our the lamp module by lifting the handle.
7.Replace the new lamp, then tighten back the screws.
8.Reinstall the lamp cover and reset the lamp usage time.
Tips:
1). Make sure the conditions of the room is clean and ventilation.
2). Change or clean your projector air filter monthly.
3). Better let your projector rest for 15minutes per 4 hours running.
4). Do not unplug the power line before the cooling fan stop working.
Please Note:
Before purchaseplease make sure that this projector lamp/bulb is compatible with your projector. If you do not find your projector model on the page, contact us to confirm.
About Product:
LBTGROUP has own factory and many experienced workers.Every lamp lamp will be test before leaving factory. So you don't need to doubt the quality. and we can solve any after-sales problems and guide the installation.
Installation Step:
1.Turn off the projector and disconnect the power cord.
2.Let the projector cool for at least 30 minutes.
3.Use a screwdriver to remove the screw from the cover.
4.Remove the cover and the lamp protection film.
5.Loose the screws of the lamp.
6.Pull our the lamp module by lifting the handle.
7.Replace the new lamp, then tighten back the screws.
8.Reinstall the lamp cover and reset the lamp usage time.
Tips:
1). Make sure the conditions of the room is clean and ventilation.
2). Change or clean your projector air filter monthly.
3). Better let your projector rest for 15minutes per 4 hours running.
4). Do not unplug the power line before the cooling fan stop working.
Similar Products
